Gorman-Redlich
257 West Union Street
Athens, Ohio  45701
Fax: (740) 592-3898                                    PH:  (740) 593-3150



	To send an emergency message that the station has to originate, begin by pressing 
the "compose header" key on the keypad.    Our order form will ask if the station is a 
primary entry point (PEP) and if it is not, the only selection that can be made is EAS.  If 
the station is not a PEP we will program the microprocessors for EAS and this step will 
not be required to send a message.  By pressing the up or down arrow the cursor can be 
moved and when it is adjacent to what you want in the header code, press enter and the 
arrowhead will appear next to your selection.  Now, press exit and your next choice in 
the header is the menu for events.  By pressing the down arrow continuously, you will go 
through every possible selection with the cursor.  When you press enter, the arrowhead  
will come on next to that event.  Now press exit and the counties in your listening area 
will appear.  By pressing the arrow button, the cursor will move from county to county.  
By pressing enter, the arrowhead will come on and you can select a county; and if you 
wish to de-select a county, press enter again. After you select the counties in the message 
(up to 31 but not more than the number of counties in your listening area), press the exit 
key and the next thing on the display will be the valid time for the event in the header 
code.  By pressing the down arrow, you can shorten the event time for your message; and 
by pressing the up arrow you can lengthen the event time.  After arriving at the time 
interval you want, press the enter button, and the arrowhead will come on.  Now, press 
the exit button, and the encoder is now ready to send the FSK header code.   Before 
sending the composed header, you might want to edit the message you have created.  If 
you press the "display composed header" button and operate the down arrow you can read 
the message your are about to send.  You must press the exit button and the unit is ready 
to go.
	If you go to the console and through a momentary remote contact closure you can 
duplicate the "send composed header" button on the front panel keypad.  Press the send 
composed header button and you send the FSK header and the two tone attention signal.  
Upon completion of the attention signal, give the audio emergency message from the 
console microphone.  Upon completion of the emergency message send the end of 
message by pressing the E.O.M. button.  If you forget to send the E.O.M. message, the 
EAS-1 will automatically send the E.O.M. after two minutes.
	If you want to send the composed header from the keypad when you press the 
send composed header button the display will ask you for the 4-digit code.  We will ask 
on the order form what 4- digit code you would want to use.  The printout of the setup 
information will show you what the 4-digit code is when the unit arrives.  When you 
press the button for the last digit of the 4-digit code the FSK code and the 2 tone attention 
signal will be transmitted.  You must give the audio message from the console 
microphone and then send the E.O.M.