257 West Union St.
Athens, Ohio 45701
Ph: 740-593-3150
Gorman-Redlich Manufacturing Co.


Instruction Downloads
Audio Downloads
Software Downloads

Equipment Instructions

Instructions in PDF format: Instructions in text format:
Starting off (When The EAS-1 Arrives) Starting off (When The EAS-1 Arrives)
EAS Programming Instructions
EAS-1/EAS-1CG Manual (HTML) EAS-1/EAS-1CG Manual (Part 1) (Part 2)
OLD Setup Instructions (Programming) OLD Setup Instructions (Programming)
How to send an Emergency Message How to send an Emergency Message
Rear Panel Description Rear Panel Description
EAS Telephone Interface Instructions EAS Telephone Interface Instructions
EAS Logging Overview
EAS Logging with HyperTerminal EAS Logging with HyperTerminal
CAP-DEC 1 User Guide

EAS Test Audio Downloads

NOTE: Before playing these tones you should turn down your system's volume level.

Required Weekly Test (RWT)

Required Monthly Test (RMT)

Tornado Warning

853 Hz Tone

960 Hz Tone

1562.5 Hz Tone

2083 Hz Tone

Software Downloads

NOTE: The downloads below contain setup software for Gorman-Redlich EAS-1 units and are for use by current Gorman-Redlich customers. This software is used to set up the EAS-1 unit to specify counties in the listening area, county of license, operator and technician passwords, station call letters, state primary status and additional parameters. These zipped files are password protected. Please contact Gorman-Redlich for password.

To download these files, right-click on the name of the file you want to download and select "Save Link As..." (Firefox users) or "Save Target As..." (MSIE users) and select the location to which you wish to save the file. Once the download has completed, navigate to the file using Windows Explorer and extract all the files in the zip archive to the desired location.

The Windows version (Windows XP/Vista/7 compatible) of the setup software should be used for EAS-1 Firmware v9.2 and above while the DOS setup software should be used for firmware v8.0 to v9.1. Contact Gorman-Redlich for instructions EAS units with firmware v8.0 and earlier.

Windows EAS Setup (firmware v9.2 or above)

DOS EAS Setup (firmware v9.1 or below)

Last Updated 8/10/2011 Pages by WCS © Copyright Gorman Redlich Mfg. Co.